U94 Push-to-Talk Adapter for Yaesu VX-6R / VX-7R / FT-270 / FT-270R

Push-to-talk adapter for Yaesu VX-6R / VX-7R / FT-270 / FT-270R. Use with a compatible headset to control radio transmission from an external button.

U94 Push-to-Talk Adapter for Yaesu VX-6R / VX-7R / FT-270 / FT-270R

Push-to-talk adapter for Yaesu VX-6R / VX-7R / FT-270 / FT-270R. Use with a compatible headset to control radio transmission from an external button.

Technical Specifications

Electrical Specifications

Microphone matching impedance: 150 Ω electret microphone; compatible with common tactical ambient-sound/noise-reduction headsets.

PTT switching: passive mechanical contact closure, without an internal amplifier and without altering the radio's native audio logic.

Maximum contact current: ≤100 mA.

Audio passband: 300–3400 Hz, matched to the radio voice-communications band.

Insulation resistance: ≥100 MΩ at DC 500 V.

Dielectric withstand: AC 500 V for 1 minute without breakdown.

Physical and Environmental Specifications

Total weight: approximately 67 g, excluding packaging.

Cable: cold- and oil-resistant TPE jacket; resistant to repeated bending, tensile stress and tangling.

Operating temperature range: −40 °C to +60 °C.

Ingress protection: IP54 for the PTT body; dust and splash resistance, not for immersion.

Salt-spray resistance: no corrosion after a 48 h salt-spray test, as listed for outdoor field use.

Cable flex life: ≥10000 bending cycles without breakage of the internal copper conductors.

Compatibility List

✅ Compatible radios: Yaesu VX-6R, VX-7R, FT-270 and FT-270R.

✅ Compatible headsets: tactical noise-reduction headsets with a standard U94 interface, including Comtac, Sordin and Peltor series.

❌ Not compatible: Kenwood two-pin, ICOM two-pin, Motorola, Hytera or radios with an ordinary three-pole 3.5 mm headset port.

Functions

Receive-audio pass-through: routes received radio voice audio directly to the tactical headset connected through the U94 interface.

PTT transmit control: pressing the button routes headset microphone audio to the radio and starts transmission; releasing it returns to receive mode.

Carriage: spring clip attaches to tactical equipment or shoulder straps, leaving the operator's hands free.

Passive operation: draws the required power from the radio; no additional battery required.

Interference suppression: cable shielding reduces RF interference, communication noise and feedback.

Interface Specifications

Radio-side connector: 3.5 mm four-pole TRRS plug conforming to the Yaesu VX6R/VX7R interface.

Headset-side connector: standard U94 3.5 mm mono military-style U94 audio socket, as listed in the Chinese specification.

PTT button: side-mounted round transmit button with a spring-loaded metal retaining clip.

Cable length: 80 cm; custom lengths of 60–120 cm available.

Housing: reinforced PA66 nylon with impact, abrasion and aging resistance.

Housing colors: black, with sand and olive-green options.

Request product information