U94 Push-to-Talk Adapter for PRC-152
Push-to-talk adapter for PRC-152. Use with a compatible headset to control radio transmission from an external button.

Push-to-talk adapter for PRC-152. Use with a compatible headset to control radio transmission from an external button.
Technical Specifications
Electrical Specifications
Microphone matching impedance: 150 Ω electret microphone; compatible with common tactical ambient-sound/noise-reduction headsets.
PTT switching: passive mechanical contact closure, without an internal amplifier and without altering the radio's native audio logic.
Maximum contact current: ≤100 mA.
Audio passband: 300–3400 Hz, matched to the radio voice-communications band.
Insulation resistance: ≥100 MΩ at DC 500 V.
Dielectric withstand: AC 500 V for 1 minute without breakdown.
Physical and Environmental Specifications
Total weight: approximately 82 g, excluding packaging.
Cable: cold- and oil-resistant TPE-jacketed coiled cable, resistant to repeated bending and tensile stress.
Operating temperature range: −40 °C to +60 °C.
Ingress protection: IP54 for the PTT body; dust and splash resistance, not for immersion.
Salt-spray resistance: no corrosion after a 48 h salt-spray test, as listed for outdoor military environments.
Cable flex life: ≥10000 bending cycles without breakage of the internal copper conductors.
Compatibility List
✅ Compatible radios: Harris PRC-152, PRC-152A, PRC-152C and PRC152 replicas using the same connector.
✅ Compatible headsets: tactical noise-reduction headsets with a standard U94 interface, including Comtac, Sordin and Peltor series.
❌ Not compatible: Motorola, Hytera, Kenwood, ICOM, Baofeng or other handheld radios with different connectors.
Functions
Receive-audio pass-through: routes radio voice audio directly to the tactical headset connected through the U94 interface.
PTT transmit control: pressing the button routes headset microphone audio to the radio and starts transmission; releasing it returns to receive mode.
Coiled cable: extends with body movement to reduce connector strain during running and tactical movement.
Carriage: retaining clip attaches to tactical equipment or shoulder straps for hands-free equipment handling.
Interference suppression: cable shielding reduces RF interference, communication noise and feedback.
Interface Specifications
Radio-side connector: PRC-152 six-pin round locking aviation-style plug.
Headset-side connector: standard U94 3.5 mm mono military-style U94 audio socket, as listed in the Chinese specification.
PTT button: side-mounted round transmit button with a tactical retaining clip.
Cable style: retractable coiled cable, approximately 80 cm relaxed and up to 180 cm extended; custom lengths available.
Housing: reinforced PA66 nylon with impact, abrasion and aging resistance.
Housing colors: black, with sand and olive-green options.