U94 Push-to-Talk Adapter for Icom V8 / V80 / V82
Push-to-talk adapter for Icom V8 / V80 / V82. Use with a compatible headset to control radio transmission from an external button.

Push-to-talk adapter for Icom V8 / V80 / V82. Use with a compatible headset to control radio transmission from an external button.
Technical Specifications
Electrical Specifications
Microphone matching impedance: 150 Ω electret microphone; compatible with common tactical ambient-sound/noise-reduction headsets.
PTT switching: passive mechanical contact closure, without an internal amplifier and without altering the radio's native audio logic.
Maximum contact current: ≤100 mA.
Audio passband: 300–3400 Hz, matched to the radio voice-communications band.
Insulation resistance: ≥100 MΩ at DC 500 V.
Dielectric withstand: AC 500 V for 1 minute without breakdown.
Physical and Environmental Specifications
Total weight: approximately 72 g, excluding packaging.
Cable: cold- and oil-resistant TPE jacket; resistant to repeated bending, tensile stress and tangling.
Operating temperature range: −40 °C to +60 °C.
Ingress protection: IP54 for the PTT body; dust and splash resistance, not for immersion.
Salt-spray resistance: no corrosion after a 48 h salt-spray test, as listed for outdoor military/police environments.
Cable flex life: ≥10000 bending cycles without breakage of the internal copper conductors.
Compatibility List
✅ Compatible radios: ICOM IC-V8, IC-V80, IC-V82, IC-V85, IC-T7H and IC-T90A.
✅ Compatible headsets: tactical noise-reduction headsets with a standard U94 interface, including Comtac, Sordin and Peltor series.
❌ Not compatible: Kenwood TK, Motorola M-type, Hytera 13Pin, Baofeng UV9R waterproof, Xiaomi or other connector types.
Functions
Receive-audio pass-through: routes received radio voice audio directly to the tactical headset connected through the U94 interface.
PTT transmit control: pressing the button routes headset microphone audio to the radio and starts transmission; releasing it returns to receive mode.
Carriage: rotating metal clip attaches to tactical equipment or shoulder straps, leaving the operator's hands free.
Passive operation: draws the required power from the radio; no additional battery required.
Interference suppression: cable shielding reduces RF interference, communication noise and feedback.
Interface Specifications
Radio-side connector: standard ICOM two-pin audio plug for IC-V8-series radios.
Headset-side connector: standard U94 3.5 mm mono military-style U94 audio socket, as listed in the Chinese specification.
PTT button: integrated round transmit button with a rotating metal retaining clip.
Cable length: 80 cm; custom lengths of 60–120 cm available.
Housing: reinforced PA66 nylon with impact, abrasion and aging resistance.
Housing colors: black, with sand and olive-green options.