PD680 X1P PD660 PD600 U94 PTT
Push-to-talk adapter for Hytera PD680 / X1P / PD660 / PD600. Use with a compatible headset to control radio transmission from an external button.

Push-to-talk adapter for Hytera PD680 / X1P / PD660 / PD600. Use with a compatible headset to control radio transmission from an external button.
Technical Specifications
Core electrical specifications
Audio impedance: Compatible with electret microphones (150Ω high-resistance pickup microphone, compatible with mainstream tactical pickup noise-reducing headphones)
PTT triggering method: Passive mechanical contact conduction, no built-in amplification circuit, does not alter the original audio logic of the walkie-talkie
Maximum current carrying capacity: ≤ 100mA
Audio bandwidth: 300Hz - 3400Hz, matching the audio communication frequency band of the walkie-talkie
Insulation resistance: ≥ 100MΩ @ DC 500V
Withstand voltage: AC 500V, no breakdown for 1 minute
Interface Specification
Handheld radio port interface: H3DA 13-pin dedicated audio plug (H4 interface, PD6 series universal) Headphone port interface: U94 standard 3.5mm single-channel audio socket (military-grade U94 interface) PTT button: Independent push-button transmitter switch, with metal back clip, can be attached to tactical vest, equipment, shoulder strap Length of wire: 80cm (customizable length 60–120cm) Plug housing material: Reinforced nylon PA66, wear-resistant and impact-resistant
Physical and environmental indicators
Overall weight: Approximately 75g (excluding packaging) Wire material: TPE oil-resistant and cold-resistant protective cable, anti-tension, anti-tangle, resistant to bending Working temperature: -40℃ ~ +60℃ Protection level: IP54 (PTT host dust-proof, splash-proof water-resistant, does not support immersion) Salt spray resistance: 48h salt spray test without corrosion (satisfies military and police outdoor use) Bending life: ≥10,000 times repeated bending, internal copper core does not break Color: Black (optional sand color / olive green)
Compatibility list
✅ Handheld radio host: Hytera PD600, PD660, PD680, X1P, HP6 series (13-pin audio port models)
✅ Headphone compatibility: All tactical headphones using standard U94 3.5mm interface, including Comtac, Sordin, Peltor series noise reduction headphones
❌ Incompatible: MTP, TETRA series, H3DA 2Pin/K port handheld radio
Function Description
Audio Direct Connection: The audio received by the walkie-talkie is directly output to the U94 interface for headphones, allowing real-time voice reception;
PTT Transmission Control: Press the button to send audio from the headset microphone to the walkie-talkie, initiating transmission; Release the button and it automatically switches back to listening mode;
Backplate Design: The PTT body comes with a rotating metal clip, which can be fixed on tactical equipment, shoulder straps, freeing both hands and suitable for operations;
Passive Design: No additional power supply is required; it relies entirely on the power supply of the walkie-talkie;
Audio Isolation: The internal circuits are shielded to reduce radio frequency interference and minimize noise and squealing when the walkie-talkie is transmitting.