U94 Single-channel Tactical PTT
This product is a tactical Push-To-Talk (PTT) button controller. One end features a 3.5mm 4-pole TRRS male plug (CTIA standard mobile phone audio definition) for connection to a mo

This product is a tactical Push-To-Talk (PTT) button controller. One end features a 3.5mm 4-pole TRRS male plug (CTIA standard mobile phone audio definition) for connection to a mobile phone audio port, while the other end has a NATO U174/U 7.0mm female socket for connecting to noise-canceling tactical headsets. Pressing the button on the housing closes the microphone transmit circuit, and releasing it switches to audio reception, enabling one-button push-to-talk communication. It comes with a metal quick-release clip that can be attached to a tactical vest, shoulder strap, or belt.
Technical Specifications
Core Electrical Specifications
Plug Type: 3.5mm 4-pole TRRS (CTIA standard, compatible with standard Android phones; not compatible with the older OMTP Nokia standard)
Female Connector: NATO 7.0mm U174/U female port (compatible with mainstream tactical noise-canceling headphones: EARMOR, M32, M31, AMP, and other U174-interface headphones)
Pinout (3.5mm TRRS male plug, from tip to sleeve)
Tip: Microphone MIC+
Ring 1: Headphone L (left channel)
Ring 2: Headphone R (right channel)
Sleeve: GND (ground) + PTT trigger
PTT Trigger Method: Passive short-circuit trigger (no power supply required, no battery)
Microphone Loop Impedance: 2.2kΩ ±10%
Audio Bandwidth: 200Hz ~ 4kHz (optimized for voice intercom)
Maximum Audio Current: ≤50mA
Insulation Resistance: ≥100MΩ @ DC 500V
Contact Resistance: ≤50mΩ
Structure and Material Parameters
Housing: High-strength ABS engineering plastic (matte black)
Clamp: Spring steel metal clamp with anti-slip teeth; left/right interchangeable mounting
Cable: TPE oil- and cold-resistant audio cable, black, with braided shield for interference resistance
Standard Cable Length: 1000mm (customizable to 600mm / 1200mm / 1500mm)
Dimensions: PTT main unit 62mm × 36mm × 28mm
Total Weight: approx. 72g
Color: Matte black (sand / olive green available)
Environment and Reliability
Operating Temperature: -20°C ~ +55°C
Storage Temperature: -30°C ~ +70°C
Protection Rating: IPX4 (splash-resistant; not IP67 military-grade waterproof; commercial model)
Button Life: ≥100,000 presses without failure
Cable Flex Life: ≥5,000 back-and-forth bends
Vibration Resistance: Meets standard commercial vibration standards; no loosening or broken cores
Compatibility List
✅ Supported: Android phones with a 3.5mm CTIA headphone jack, recording intercom apps, and walkie-talkies supporting CTIA 3.5mm TRRS
✅ Headphones: All U174 NATO 7.0mm plug tactical headphones (M31, M32, Sordin, EARMOR, etc.)
❌ Not Supported: iPhone models without a 3.5mm jack (requires an additional Apple MFi adapter), OMTP-standard devices, K-type / Kenwood dual-pin walkie-talkies
Function Description
Plug the cable into the phone’s 3.5mm audio port, and plug the tactical headphones into the U174 female port.
Press the PTT button: the microphone circuit is activated, the app switches to transmit mode, and audio pickup is enabled.
Release the PTT button: it automatically switches back to receive mode, allowing you to hear the other party through the headphones.
Audio passthrough: the left and right audio channels of the headphones are passed through continuously; when the PTT button is not pressed, audio plays normally.